Selected Publications

AIR INJECTION

Belgrave, J.D.M., Moore, R.G., Bennion, D.W.: “A Comprehensive Approach to In-Situ Combustion Modeling”, SPE Advanced Technology Series, Vol. No. 1., pp 98-107.

Freeman, L.W., Nzekwu, B.N., Belgrave, J.D.M.: “A Breath of Fresh Air – EnCana’s Displacement Solution to the Gas Over Bitumen Issue”, presented at World Heavy Oil Congress, Edmonton, Mar. 1-12, 2008.

Belgrave, J.D.M., Nzekwu, B.N., Chhina, H.S.: “SAGD Optimization with Air Injection”, paper SPE 106901, presented at the SPE Latin American and Carribean Petroleum Engineering Conference, Buenos Aires, April 15-18, 2007.

Belgrave, J.D.M., Chhina, H.S.: “Air Injection: Timely and Widely Applicable”, paper 2006-432, presented at the 1st World Heavy Oil Conference, Beijing, Nov. 12-15, 2006. 

Fassihi, M.R., Newbold, F., Belgrave, J.D.M., Yahhimaras, D.V.: “Laboratory and Simulation Characterisation of Light Oil Air Injection”, In Situ, 24(4), 2000, pp. 219-249.

Moore, R.G., Laureshen, C.J., Ursenbach, M.G., Mehta, S.A., Belgrave, J.D.M.: “A Canadian Perspective on In-Situ Combustion”, J. Can. Pet. Technol. Special Edition, Vol. 38, No. 13, 1999.

Moore, R.G., Ursenbach, M.G., Laureshen, C.J., Belgrave, J.D.M., Mehta, S.A., “Ramped Temperature Oxidation Analysis of Athabasca Oil Sands Bitumen”, J. Can. Pet. Technol. Special Edition, Vol. 38, No. 13, 1999.

Wichert, G.C., Okazawa, N.E., Moore, R.G., Belgrave, J.D.M.: “In-Situ Upgrading of Heavy Oils by Low-Temperature Oxidation in the Presence of Caustic Additives”, paper SPE 30299, presented at the International Heavy Oil Symposium, Calgary, June 19-21, 1995.

Moore, R.G., Belgrave, J.D.M., Mehta, S.A., Ursenbach, M.G., Laureshen, C.J., Xi, K.: “Some Insights into Low-Temperature and High-Temperature In-Situ Combustion Kinetics”, paper SPE 24174, presented at the SPE/DOE 8th Symposium on EOR, Tulsa, April 22-24, 1992.

Belgrave, J.D.M., Moore, R.G., Bennion, D.W.: “The Thermal Behavior of Vertically-Operated Near-Adiabatic In-Situ Combustion Tubes”, Journal of Petroleum Science and Engineering, 5 (1990), 51-65.

Belgrave, J.D.M., Moore, R.G.: “A Model of Improved Analysis of In-Situ Combustion Tube Tests”, J. Pet. Sci. Eng., 8 (1992), 75-88.

Moore, R.G., Bennion, D.W., Belgrave, J.D.M., Gie, D.N., Ursenbach, M.G.: “New Insights into Enriched-Air In-Situ Combustion”, J. Pet. Technol., July 1990.

Ursenbach, M.G., Moore, R.G., Bennion, D.W., Belgrave, J.D.M.: “Laboratory In-Situ Combustion Behavior of Athabasca Oil Sands”, Petroleum Society Paper 93-10-25, Proceedings of the Fourth Petroleum Conference of the South Saskatchewan Section, the Petroleum Society and CANMET, Regina, October 18 – 20, 1993.

Moore, R.G., laureshen, C.J., Ursenbach, M.G., Mehta, S.A., Belgrave, J.D.M.: “Combustion/Oxidation Behavior of Athabasca Oil Sands Bitumen”, SPE Reservoir Eval. & Eng. 2 (6), December 1999.

HORIZONTAL WELLS

Belgrave, J.D.M., Bora, R.: “On the Performance of Horizontal Wells in Reservoirs Containing Discontinuous Shales”, J. Can. Pet. Technol., Vol. 35, No. 5, may 1996.

GAS INJECTION

Belgrave, J.D.M., Win, T.: “Vertical Sweep Efficiency and Oil Recovery from Gas Injection in Heterogeneous Horizontal Reservoirs”, paper SPE 26085, presented at the Western Regional Meeting, Anchorage, May 26-28, 1993.

STEAM INJECTION

Belgrave, J.D.M., Moore, R.G., Ursenbach, M.G.: “Comprehensive Kinetic Models for the Aquathermolysis of Heavy Oils”, J. Can. Pet. Technol., Vol. 36, No. 4, April 1997.

Belgrave, J.D.M., Moore, R.G., Ursenbach, M.G.: “Gas Evolution from the Aquathermolysis of Heavy Oils”, Can. J. Chem. Eng., Vol 72. June 1994.

FOAM FLOODING

Shrivastava, V.K., Singhal, A.K., Coombe, D.A., and Belgrave, J.D.M.: “Numerical Simulation of Foam Flooding for Sweep Improvement”, paper  97-58, presented at the Annual Technical Meeting of the Petroleum Society of CIM, Calgary, June 8-11, 1997.

FRACTURED CARBONATES

Sobbi, F., Belgrave, J.D.M., Ashoori, S. and Ghloamzadeh, S.: “Matrix Block Size Determination of Iranian Naturally Fractured Reservoirs”, paper 95-54, presented at the 46th Annual Technical Meeting of the Petroleum Society of CIM, Banff, Alberta, May 14-17, 1995.



Previous Page